Digital Thermostat Dalas 40a / -55 ° C ... + 125 ° C / L Length = 1m (with A Sealed Temperature Sensor) On A Din-rail

Two-threshold thermostat universal digital DALAS (with SEALED temperature sensor) on DIN rail c " lift "fasteners-contacts for wires with a maximum permissible current load 40A (amperes) - designed to maintain the required temperature, primarily WATER , as well as air for heating; can be used for any devices, installations, heating boilers, etc., where it is necessary to control the temperature of WATER or air, and maintain it at a given level ( upper threshold temperature is set, where the thermostat will disconnect the load, and lower threshold at which the thermostat will turn on the load again).

ATTENTION !!! The temperature sensor of the regulator can be immersed in water, as it is absolutely hermetically protected !!! If this device suits you according to the characteristics, but a sealed temperature sensor at the end of the wire is not at all necessary, then pay attention to the product under the code 2247 (or 91 ).

Range of measured and set temperatures: from -55 ° С to + 125 ° С

Maximum connected load: 8 kW (40A), but preferably a connection of no more than 6 kW

Supply voltage: from 160V to 250V < / strong>

Accuracy of temperature maintenance: 0.1 ° С

Wire length (with a temperature sensor at the end) = 1 meter

If the length of the wire of 1 meter is not enough for you (a longer length is needed), you can absolutely safely increase its length without any negative consequences for the normal functioning of the device, but in places where the wire is increased, the tightness will be broken.

Production - Ukraine (Kharkov).