Digital Universal Thermostat Dalas 40a / -55 ° C ... + 125 ° C / On A Din-rail (with Lift Contacts)

Two-threshold thermostat digital universal DALAS 40A (ampere) on DIN-rail with "lift" fasteners-contacts for wires - designed to maintain the required air temperature for heating in electric heating systems, electric boilers, as well as any other heat-electric systems. The device can be used for any electrical systems and installations where it is necessary to control the air temperature and maintain it at a given level (the upper temperature threshold is set, where the thermostat will turn off the operating unit, and the lower threshold at which the thermostat will turn it on).

LIFT contact mount for wires is much more reliable than a SCREW mount, and therefore a little more expensive !!!

ATTENTION !!! Do not immerse the temperature sensor of the regulator directly in water, as it is NOT hermetically sealed !!!

Range of set and measured temperatures: from -55 ° С to + 125 ° С

Maximum connected load: 8 kW (40A), but it is desirable to connect no more than 6 kW

Supply voltage: 160V - 250V

< p> Accuracy of temperature maintenance: 0.1 ° C

Wire length (with a temperature sensor at the end) = 1.5 meters

< p> If the length of the wire of 1.5 meters is not enough for you (a longer length is needed), you can absolutely safely increase its length without any negative consequences for the normal functioning of the device.

Production - Ukraine (Kharkov).

This thermostat has proven itself from the best side and has the best PRICE-QUALITY ratio on the Ukrainian market.

Read the instructions presented on the posted PHOTOS.