Heating element for washing machine 1900w L-183 with a place for the sensor

Buy online now for free fast shipping worldwide!

Heating element for washing machine .

Immersion length - 183mm

With board.

Tubular electric heater for washing machine, suitable to brands such as: Ariston Ariston, Bosch Bosch, Candy Kandy, Zanussi Zanussi, Beko Beko, Samsung Samsung, Hotpoint-Ariston Hotpoint-Ariston, Gorenje, Electrolux Electrolux, Whirlpool Whirlpool, Indesit Indesit, Siemens Siemens, LG LV, AEG AEG, Asko Asko, Atlant Atlant, Hansa Hansa, Bauknecht Bauknecht, Hoover Kuwer, Taiser Cube , Ardo Ardo, as well as brands of other manufacturers.

The heating element is an electric heater that is responsible for heating cold water coming from the central water supply system to the washing machine. Structurally consists of a heating element M-shaped able to withstand heat up to high operating temperatures.

When choosing a heating element for a washing machine, you need to show maximum attention. This will help to acquire an element of the necessary parameters and quickly revive the washing machine for further full and productive work.

First of all, you should pay attention to the length of the heating element, measure it from the edge of the metal flange to the very end point of the heating element (immersed part)

The power factor should also be taken into account. Usually it is indicated on the flange part of the heating element. It is not advisable to exceed the difference between a damaged part and a new by more than 150 W.

The presence of a temperature sensor is another important parameter. Certain models of heating elements are not equipped with this part, but only have a hole for it, this is due to the fact that very often when the old TEN burns out, the sensor remains in a normal, operable state and can to be fully used further. Heaters with only a hole for the sensor are cheaper, so owners can save a little by using a new heating element with an existing thermal sensor.

In old washing units, most often there are heating elements with a dull flange surface.

If this part is burnt out (the heating element is out of order) you should try to buy exactly the same one or consult with a specialist regarding the correct replacement of the heating element.