Thermostat incubator high-precision analog Tsyp-Tsyp 1kW / 220V (socket) Ukraine

High-precision analog thermostat for "CHICK-CHICK" incubator with a maximum load capacity of 2kW . The thermostat is plugged into an outlet

Voltage - 220V

1.General instructions

Accuracy of temperature maintenance 0 , 1 ° C. Range of temperature maintenance 24 ° C-48 ° C

In this thermostat, the "Heater protection" system is used. to warm up the incubator, 100% of the heater's power is used, and to maintain the temperature, 50% of the heater's power, which greatly increases the service life.

2. Purpose of the thermostat

The thermostat is designed to maintain the set temperature in incubators

3.Temperature setting and operation of the thermostat a

3.1 Place the temperature sensor in a place where it is necessary to maintain the temperature, preferably near the thermometer. (thermometer not included)

3.2 Connect the heater to the thermostat

3.3 Set the adjustment knobs coarse and fine ", to the extreme right

3.4 Connect the device to the mains. 2 LEDs on the thermostat should light up, green - mains and red - heating

3.5 When the required temperature is reached, turn the knobs "coarse" and "fine" (depending on the temperature you selected ) get the red LED off, after that the thermostat entered the operating mode. After a while, after warming up the incubator, additional temperature correction may be required.